Boiler Ion Exchange Resin Replacement Operation Method And Frequency

The boiler ion exchange resin needs to be replaced regularly during use to ensure the effect of water treatment. And the boiler resin needs to be operated according to the operating code when it is replaced. So today, I will introduce to you the operation method and frequency of boiler ion exchange resin replacement.

Operation method for boiler ion exchange resin replacement
Boiler ion exchange resin replacement is a certain skill, in line with the skill can extend the use of the resin to increase its life, otherwise it will damage its performance, which will naturally have its replacement skills, methods.
1, remove the boiler ion exchange resin need to have a certain skill and order, must be in accordance with the order, first remove the inlet and outlet water pipe, sewage pipe, salt suction pipe, and then take off the control valve head!
2, pull out the center tube, this step is an important process, but if the tank diameter is greater than 500mm, you can not take out the center tube, because the center tube will not be contaminated.
3, the use of siphon principle to extract resin, this is a very scientific method, it is worth advocating.
4, then install the center pipe, (if removed) and block the top of the center pipe with a plastic sheet, so as to prevent the resin from pouring into the center pipe, resulting in blockage.
5, pour the resin, install the control valve head, in order to fix the resin.
6, the control valve is adjusted to the backwash position (downstream regeneration) a small amount of water and keep the water speed unchanged, in this method to discharge the resin tank gas.
7, see if there is leakage, if there is no leakage. Everything is in place and then the resin is replaced.