What you need to know about using FRP tanks

The technical requirements of the glass steel treatment resin tank are usually composed of four layers: an inner surface layer, an inner layer, a strength layer and an outer surface layer. Then other hierarchical structures can be adopted on request. The wall thickness of the tank changes according to the premise of the design requirements, in addition to this requirement, the resin content of the surface layer and the inner layer in its cylinder varies according to the storage medium. The inner wall of the product has a cone corner of more than 1°. So it's going to have so many advantages in terms of satisfying these conditions. In addition, the allowable circumferential strain of the wall of the glass-steel treatment resin tank is less than 0.1% under loading conditions. For the user, its fiber winding layer, when the spiral winding Angle is 80°, the axial tensile strength is not less than 15MPa. At present, for the wide application of glass steel treatment resin tanks in daily life and its increasingly better production technology, but also let us believe that there will be more and more production to join in the future, in the face of such a situation when you choose cooperation, then we have to look more and compare. Over the years, the company is committed to the expansion and development of domestic and foreign markets, using online Internet e-commerce platform and offline physical sales two ways at the same time.

So now are also making their products all over the country, provinces, cities, autonomous regions, products do not sell well in the domestic market, there is a way to contact the official website. We will also meet these requirements when producing glass-steel treatment resin tanks. And the head of the vertical storage tank can be ellipsoidal, flat and conical, and the upper and lower head can also be combined in different forms. The head of the horizontal storage tank is oval. The strength layer of the head is mainly jet and hand paste, and the winding envelope is auxiliary. When the surface felt of the product, the short-cut primary color felt and the no-twist roving cloth are laid, the interlayer seams should be staggered, of course, its width is not less than 60MM. The width of the tower is 30MM. The quality content of the resin is not less than 40%. If you choose this vertical tank for the flat, it is recommended that you should note that its bottom corner radius is not less than 38MM, the bottom thickening decline is tangent to the flat bottom, and the small thickness of the corner strengthening area is the sum of the structural thickness of the cylinder and the head. The company uses the current domestic advanced complete sets of production equipment and technology, the products produced by high quality, beautiful appearance, durable.