Performance characteristics of FRP tank

Glass fiber reinforced plastic tank manufacturers are made of resin and glass fiber through the microcomputer control machine wound into a non-metallic composite material tank, its performance characteristics are also very prominent, has been widely favored by users.

1. light and high strength: the relative density of FRP steel cans is between 1.5 and 2.0, only 1/4 to 1/5 of carbon steel, but the tensile strength is close to, or even more than, carbon steel, and the specific strength can be compared with advanced alloy steel. Therefore, it has excellent results in aviation, rockets, spacecraft, high-pressure vessels and other products that need to reduce their own weight. The tensile, bending and compressive strength of some epoxy FRP can reach more than 400Mpa.

2. good corrosion resistance: FRP is a good corrosion resistant material, the atmosphere, water and general concentrations of acid, alkali, salt and a variety of oils and solvents have good resistance. It has been applied to all aspects of chemical corrosion prevention and is replacing carbon steel, stainless steel, wood, non-ferrous metals and so on.

3. good electrical performance: FRP tank is an excellent insulating material, used to manufacture insulators. Good dielectric properties can still be protected at high frequencies. Microwave has been widely used in radomes because of its good transmittance.

4. excellent process: according to the shape of the product, technical requirements, use and quantity to flexibly choose the molding process; The process is simple, it can be formed at one time, and the economic effect is outstanding, especially for the small number of products with complex shapes and difficult to form, and its technological superiority is highlighted.

FRP tank assembly work

Fiberglass tank design flexibility, tank wall structure performance is excellent, fiber wound fiberglass can change the resin system or reinforcement material to high-speed fiberglass tank price and non-standard device physical and chemical properties to meet the needs of different media and working conditions, today with you to share the assembly of fiberglass tank:

1. Release the cured head, cut it into the size specified in the design document, and then lift it to the top of the mold, paste the corner of the cylinder with the short cut felt hand, so that the head and the cylinder can achieve seamless connection.

2, the production of glass steel tank bottom. The tank bottom head is made by using the flat ground reinforced by cement reinforcement. The diameter of the bottom head is larger than the diameter of the tank to facilitate the strengthening of the external corner of the tank. The bottom of the glass fiber reinforced plastic tank can be wound and crossed with the cylinder to shorten the construction period.

3. Process inspection. Check the upper head and lower head for bubbles and white spots, and deal with any problems in time.

null