Inert Polymer Resin for Layering in Mixed Bed Systems

Lanlang ® TY INB-3 is an inert bead form resin designed with a bead size and specific gravity in between that of active cation and anion resins. Lanlang ® TY INB-3 is intended for mixed bed demineralizers where a barrier layer of inert resin is desired surrounding the interface collector after backwash. Lanlang ® TY INB-3 is supplied in an inert form.

Mixed Bed Units are an ion exchange method used where superior water quality is needed. They are typically the last treatment step in the water treatment process train. They are normally positioned downstream of either individual two-bed working ion exchange units or reverse osmosis systems, further treating the effluent of these demineralizers.

For low TDS (Total Dissolved Solids) waters, they can be used as stand alone ion exchange units. In this application they are often referred to as "Working Mixed Beds". In condensate polishing applications, you can use Mixed Bed Ion Exchange to remove condensate contamination before reuse.

Lanlang is the member of American Water Quality Association. In 2016, Lanlang obtained WQA Certification with NSF / ANSI61 and 372 standard. And in 2022, Lanlang obtained NSF Certification with NSF/ANSI44 and 42 standard.

Hot Tags: inert polymer resin for layering in mixed bed systems, China inert polymer resin for layering in mixed bed systems manufacturers, suppliers, factory, inert resin, polymer inert resin, downflow regeneration resin, Inert Polymer Resin for Borehole, Inert Polymer Resin for Borehole, Inert Polymer Resin Series